Sort By
Select option
MODEL B465SY2 11-AXIS TURNING/MILLING CENTER W/ SUB-SPINDLE & (2) Y-AXIS LIVE-TOOLING TURRETS • 2.75” BAR CAPACITY • 3.54” OF Y-AXIS STROKE ON BOTH TURRETS • 35 HORSEPOWER MAIN SPINDLE • C-AXIS M...
6.0
# Axis
20.0in
Swing
37.5in
Machining Length
8.0in
Chuck Size
NEW in 2019/Installed in 2020 with only ~ 400 Hrs Powerful/Dynamic/Ergonomic/Compact 5-axis precision machining center with 360° rotary table D=900mm-870x870 on left of the working area additional ...
1650.0mm
X
820.0mm
Y
820.0mm
Z
5.0
# Axis

Nakamura-Tome TW-10

CNC Lathes
Stock #: 57
Used - Good
1990 Nakamura-Tome TW-10 (45 Deg. Slant Bed)6 X Dual spindle, Dual Turret Turning Center
7.09in
Swing
6.1in
Machining Length
--
# Axis
5.0in
Chuck Size
The Tsugami B0326-III Swiss Type Lathe easily and quickly converts from direct-drive guide bushing barfed operation to non-guide bushing operation when fitted with a chucker kit. Ideal for round or...
1.25in
Spindle Hole Dia
7.5hp
Power
8000.0rpm
RPM
8.0
# Axis
2012 Tru-Tech TT-8500 3 Axis Grinder. Has very low hours and kept in great condition.
6.0
# Axis
20.0in
Swing
--
Machining Length
8.0in
Chuck Size
6.0
# Axis
20.0in
Swing
--
Machining Length
8.0in
Chuck Size
Linear Way Vertical Machining Center
30.0in
X
18.0in
Y
20.0in
Z
20.0hp
Power
Single Turret, Dual Spindle lathe with Live tooling capability on all 12 turret stations. This machine is also equipped with Y axis and C axis.
15.74in
Swing
14.96in
Machining Length
--
# Axis
--
Chuck Size
1.25in
Spindle Hole Dia
7.5kw
Power
8000.0rpm
RPM
7.0
# Axis
200.0mm
Swing
300.0mm
Machining Length
--
# Axis
6.5in
Chuck Size
2005 Eurotech 420SLL SN.7136 / REFURB Info WORK DONE Sub spindle rebuild Actuator rebuild Lower turret seal kit Power supply Machine bed fan Upper turret seal kit Transmission for upper turret reb...
200.0mm
Swing
300.0mm
Machining Length
--
# Axis
6.5in
Chuck Size
400.0mm
Swing
400.0mm
Machining Length
4.0
# Axis
210.0mm
Chuck Size
21.46” X 21.46” CNC Lathe with 4 Axis Milling Spindle and Lower Turret, Both Able To Work On Either Spindle, Both Main & Sub Spindles Equipped with 6” Chucks with 6,000 RPM and 15 HP Motors, The 12...
18.5in
Swing
20.4in
Machining Length
--
# Axis
6.0in
Chuck Size
2010 FRYER SL-8 SN.87024 / REFURB Info Work done X-Axis gib tension screw New battery Cleaned NCU
20.0in
Swing
19.0in
Machining Length
--
# Axis
8.0in
Chuck Size
2005 Mazak VCN 510C SN.176605 / REFURB Hours- Power On(1399) Operating(6281) Cutting(4396) Work done Y axis ball screw bearings X axis ball screw bearings
• New 1-1/2" capacity • Make complex parts complete • Driven tools and "Y" axis • Z3 axis on sub-spindle • Near instant stock advance through unique collet clamping system. • (2) 8-station turrets ...
38.0mm
Spindle Hole Dia
--
Power
--
RPM
--
# Axis
2005 Mazak VCN 510C SN.176606 / REFURB WORK DONE: Y axis ball screw bearings Touch probe breaker bar Work light bulb. Cleaned
2016 EUROTECH XTREME 32 SLY-B SN.3280320 Hours- Power On(1657) Operation(496) FEATURES • Mitsubishi 70 Control. Completely loaded with many options. • Graphics parts cutting display • Hig...
32.0mm
Spindle Hole Dia
7.5hp
Power
6000.0rpm
RPM
--
# Axis
2004 Mazak VCN 510 C SN 168959 - REFURB WORK DONE  New Power supply  Y axis ball screw bearings  Work light bulb  Cleaned
41.3in
X
20.0in
Y
20.0in
Z
20.0hp
Power
2004 Mazak VCN 510C SN.168914 / REFURB WORK DONE: Y axis ball screw bearings X axis ball screw X axis ball screw bearings Work light bulb Cleaned
41.3in
X
20.0in
Y
20.0in
Z
20.0hp
Power
2003 Eurotech 730SLY SN.7936 / REFURB Info Hours- Power On(96689) Cutting(8041) WORK DONE: Sub spindle rebuild Power supply Touch probe solenoid valve Turret seal kit Touch probe position sens...
20.5in
Swing
17.7in
Machining Length
--
# Axis
8.0in
Chuck Size
40.0in
X
20.0in
Y
20.0in
Z
15.0hp
Power
2.0
# Axis
23.2in
Swing
--
Machining Length
12.0in
Chuck Size
1.0in
Spindle Hole Dia
--
Power
--
RPM
--
# Axis
2.16in
Capacity
12.0ft
Bar Length