General Specifications per Brochure/Original Quote (buyer needs to verify):
MACHINING CAPACITY
Maximum bar capacity 1.77”
Maximum turning diameter 8”
Maximum turning length 16.93”
(with standard ejector and catcher)
Maximum swing Y-axis stroke 3.8”
CHUCK WORK
Chuck diameter - (main spindle) 6”
- (sub-spindle) . 6”
Type hydraulic
Maximum speed 5000 RPM
WORK LENGTH
Distance between spindle faces 27.5
MAIN SPINDLE
Draw-tube capacity 1.77”
Spindle through bore capacity 2.17”
Spindle speed range (infinitely variable) 5000
Variable speed steps Direct drive
Spindle motor 20 HP
Motor type S series
Spindle nose A2-5

SUB-SPINDLE
Drawtube capacity 1.77”
Spindle through bore capacity 2.17”
Spindle speed range (infinitely variable) 5000
Spindle drive motor (variable speed) max. rating 10 HP
Spindle nose A2-5
Slide movement - (B-axis). . NC control
- (X-axis)hi-lo Hydraulic
Slide stroke - (B-axis). .16.33”
- (Z-axis). 9.44”
UPPER TURRET
Number of tool stations (main spindle) 12
Turret indexing time . 0.10 sec/pos.
Turret indexing type Fanuc servo-driven bi-directional
Slide stroke: Z-axis - 15.0”
X-axis - 6.5”
Y-axis - 3.8”
LOWER TURRET
Number of tool stations (main spindle) 12
Turret indexing time 0.10 sec/pos.
Turret indexing type Fanuc servo-driven bi-directional
Slide stroke:
Z-axis 9.4”
X-axis 5.8”
REVOLVING TOOL ATTACHMENT UPPER/LOWER TURRET
Number of upper turret positions 12 max
Number of lower turret positions 12 max
Drive motor – maximum rating
(upper and lower turrets) AC HP 5
Speed range (infinitely variable) 4000
Machine capacity (upper and lower turrets)
- Drilling . ¾”dia.
- End Mill . ¾” dia.
- Tapping . ½” dia.
Revolving tool axis X, C, Z & Y

GENERAL INFORMATION
Voltage required 400 volt AC, 3-phase
Air Supply 80 psi @ 4 CFM
Amperage Draw 120 Amp.

MACHINE DIMENSIONS
Width. 83.8”
Height 86.7”
Length 122.7”
Length with chip conveyor 161.7”
Machine weight with chip conveyor 14,900 lbs.

NOTE: Horsepower given are the 30 min. ratings.