Inspected by certified technician. “Incredible – Beautiful Condition” 2013 Samsung MCV 380TD Pallet Changing Machining Center

“Productivity Visualized in a VMC”: this 2013 Samsung MCV 380 TD is a Vertical Pallet Changing Machining Center designed for maximum machining productivity. Full Inspection Report Available. The model in our inventory comes with a lift up chip conveyor system, a 20 tool double arm ATC, an Auto indexing pallet table, through the spindle coolant, and a 12,000 rpm spindle with rigid tapping. Major construction advantages are the dual table pallet changing system and wide linear guide ways to  provide maximum speed, accuracy, and repeatability.

samsung base

  • Control
  • Tooling
  • General Specs

The Control- The Samsung MCV Machining center comes with a Fanuc 0i-MD Control. This is a 32-bit multiprocessor continuous-path control with an 8.4” Color LCD screen. General hardware includes;

 Flash memory card interface
 USB Connection
 RS 232C interface
 Ethernet connection
 110V AC outlet

Like we said on the Star SA-12 article, Fanuc controls are easily justifiable on used machine. Typically, a bad control, drive, or motor can easily add add up to the be your most expensive repairs. But with the support system and warranties available for the Fanuc CNC control units, they are almost “risk free”– Labor, travel, and parts (servo motors, spindle motors, drives, control units, ect…) are all covered for a year starting at $1,750. Contact us for more details and pricing on this control and warranty.

Tooling- This Samsung Mill has a BT30 tool shank. The tooling is set up on a double swing arm automatic tool changer with a 20 tool capacity. Tool changes are made in .85 seconds.

BT30 Tool               20 tool changer smasung

 

General Specs- 

TRAVELSamsung Travel
X axis travel 20.50”
Y axis travel 15.00”
Z axis travel 13.80”                                                                                                                    Distance from column to spindle center 18.50”                                                                  Distance from table top to spindle nose 7.87”~ 21.65”

TABLE
Table size 2- 16.54” x 23.62”
Loading capacity (lbs.) 2 – 440 lbs.
Pallet change time 4.5 sec.

SPINDLE
Spindle speed 12,000 rpm
Maximum torque 26.0 ft.-lbs.

AUTO TOOL CHANGER
Tool shank BT30
Pull stud type MAS P30T-l
Maximum tool diameter [adjacent empty] 2.56” [4.72”]
Maximum tool length 7.9”
Maximum tool weight 6.6 lbs.
Tool changing method Double swing arm
Tool selection method Random
Tool changing time (T-T) 0.85 sec.
Magazine capacity 20

samsung tool change
FEED RATE
Rapid traverse (X / Y / Z) 1969 ipm / 1969 ipm / 1969 ipm
Cutting feed rate ipm 787

MOTORS
Spindle drive motor 7.5 hp
Feed motor (X / Y / Z) 4.1hp / 4.1hp / 4.1hp
Slide ways LM Guide
Coolant pump motor 0.54 hp
Lubricant pump motor 0.02 hp
MACHINE SIZE
Floor space (L x W) 158” x 70”
Machine height 98”
Mass of machine 9,921 lbs.
Total power capacity 30 kVA
CNC System Fanuc 0i-MD
MACHINE CONSTRUCTION & FEATURES

 Fine Grain one-piece Meehanite cast iron bed
 Rigid triangular rib body structure for minimizing vibration and deformation under heavy machining
 Anti-heat displacement spindle and headstock design
 Ultra precision and high rigidity spindle bearings
 Wide and heavy duty linear guide ways
 High precision pre-tensioned large diameter ball screws for all axes
 Powerful and reliable Fanuc motors and drives system
 Automatic lubrication through metered piston distributor
 Way lube separation system

Included EQUIPMENT

 20 tools double arm ATC
 Auto indexing pallet table
 Thru the spindle coolant at 230 psi
 12,000 rpm spindle
 Rigid tapping
 Machine work light : fluorescent lamp
 3 Color status light
 Coolant system with separate coolant tank
 Telescopic way covers
 Full splash guard
 Spindle load meter
 Lubrication system
 Portable manual pulse generator
 Programmable and data protection key switch
 Leveling adjusting parts

FANUC 0i-MD CONTROL SPECIFICATIONS

TYPE OF CONTROL
 32-bit multiprocessor continuous-path control

HARDWARE COMPONENTS
 8.4” Color TFT LCD screen
 Flash memory card interface
 USB Connection
 RS 232C interface
 Ethernet connection
 110V AC outlet
SCREEN DISPLAY
 Window oriented operator interface
 Display of current block during program execution
 Screen texts: English (other languages: optional)
 Actual cutting / Spindle speed display
 Alarm display and alarm history display
 Clock (function) display

For more information on buying or selling used machinery, please contact us  or request a quote.

Email: CNCteam@machinemaxx.com or call us at 352-888-6200