CNC Lathes
Stock #: 190
The L2100SY features a 45° slant bed design which was developed using finite element analysis (FEA) to absorb vibration and minimize thermal growth, ensures a stable platform for powerful precise c...
C-Frame Presses
Stock #: 189
Stock #: 188
300 Ton Press with Two Hand Controls, Hydraulic Tonnage Control, Full Tonnage Throughout Stroke, Counterbalance Valve For Punching and Magnetic Starter with Over & Under Voltage Protection with Dis...
5-Axis or More CNC Lathes
Stock #: 187
MODEL B446SLLY 10-AXIS TURNING/MILLING CENTER W/ SUB-SPINDLE & (1) Y-AXIS LIVE-TOOLING TURRETS • 2.0" BAR CAPACITY • 3.54” OF Y-AXIS STROKE ON BOTH TURRETS • 20 HORSEPOWER MAIN SPINDLE • C-AXIS MA...
Stock #: 186
420 SLLY – 8-AXIS TURNING CENTER W/ SUB-SPINDLE & (2) LIVE-TOOLING TURRETS •1.77” BAR CAPACITY • FULL 3.8” OF “Y” AXIS STROKE • 20 HORSEPOWER MAIN SPINDLE • C-AXIS MAIN & SUB-SPINDLES • 24 LIVE TOO...
Stock #: 185
Universal Machining Centers
Stock #: 184
18,000 RPM Capable CAT 40 Spindle Extended ATC Carriage Chip Conveyor and Transformer included!
Laser Cutters
Stock #: 182
Beam ON Time - 3206 Hours *Bellows, Ignitor Bulb and 30 resistors just replaced
Stock #: 177
Stock #: 176
Vertical Machining Centers (5-Axis or More)
Stock #: 175
HERMLE 5-AXIS CNC VERTICAL MACHINING CENTER / Model C20U HSK 63 Spindle / 18000 RPM Capable Probe, chip conveyor, and Tool Holders Included!
Swiss Type Automatic Screw Machines
Stock #: 173
The SwissTurn Y-axis slides dualspindle Swiss type CNC auto lathe - the ultimate for bar machining. The main performance benefits offered: * Reduction of cycle times * Great rigidity to allow ma...
Stock #: 160
Multi Axis Lathe with main and sub spindle. Inculdes tool holders, chucks, and barfeed.
Stock #: 153
Vertical Machining Centers
Stock #: 151
Haas VF-2 with 5th axis (4+1). This machine has had very little use and is in excellent condition[ 4 hrs. Run Time /1062 Power ON Time]. The Trunnion table is a TRT-160
Stock #: 150
Fabrication Equipment
Stock #: 146
DESCRIPTION: 5" X 5" Angle Roll with Steel Machine Body (ST-52) Construction, on Pro 120 Rolls are Driven by a Hydraulic Motor + Planetary Gearbox and Gears, Shafts Made of Special Steel, Hardened...
Centerless Grinders
Stock #: 145
As Is/Where Is
Stock #: 141
The CBT1640 sports and impressive 2 3/8" spindle bore, and a 6 position auto indexing tool post for easy tool changes. The CBT1640 is a very rigid and reliable CNC lathe, and we've had nothing bu...
Stock #: 140
The RH30 is a massive rigid way frame with a 70 mm spindle. With 60″ x 30″ x 28″ travels and weighing 11,000 pounds, this machine is an excellent fit for those needing a larger travel tool room mac...
Stock #: 139
Stock #: 138
Circular Cold Saws
Stock #: 137
The Quantum Macc TA 400-A Fully-Automatic Saw specializes in cutting solid or section bars made of aluminum or light alloys, and runs at 3,000 R.P.M. The blade holder shaft is on bearings with Tefl...
Stock #: 135
The PNF350-2CNC is an automatic programmable, pivot arm cold saw that is used to cut non-ferrous metals. The PNF350-2CNC miters from 45° left to 45° right. It also features a robust sawing head tha...
Magazine Type Bar Loaders
Stock #: 128
The Edge Technologies’ Patriot 551 automatic bar feeder is designed specifically for the U.S. marketplace. This bar feeder is designed for automatically feeding round, square, and hexagonal bar sto...
Stock #: 126
Stock #: 125
Stock #: 124
Stock #: 122
Stock #: 121
