Loading...

Stock #: 190

The L2100SY features a 45° slant bed design which was developed using finite element analysis (FEA) to absorb vibration and minimize thermal growth, ensures a stable platform for powerful precise c...

24.8in
Swing
17.91in
Machining Length
--
# Axis
8.0in
Chuck Size

Stock #: 188

Used - Excellent

300 Ton Press with Two Hand Controls, Hydraulic Tonnage Control, Full Tonnage Throughout Stroke, Counterbalance Valve For Punching and Magnetic Starter with Over & Under Voltage Protection with Dis...

300.0T
Tonnage

Stock #: 187

Used - Excellent

MODEL B446SLLY 10-AXIS TURNING/MILLING CENTER W/ SUB-SPINDLE & (1) Y-AXIS LIVE-TOOLING TURRETS • 2.0" BAR CAPACITY • 3.54” OF Y-AXIS STROKE ON BOTH TURRETS • 20 HORSEPOWER MAIN SPINDLE • C-AXIS MA...

10.0
# Axis
--
Swing
--
Machining Length
8.0in
Chuck Size

Stock #: 186

Used - Excellent

420 SLLY – 8-AXIS TURNING CENTER W/ SUB-SPINDLE & (2) LIVE-TOOLING TURRETS •1.77” BAR CAPACITY • FULL 3.8” OF “Y” AXIS STROKE • 20 HORSEPOWER MAIN SPINDLE • C-AXIS MAIN & SUB-SPINDLES • 24 LIVE TOO...

--
Swing
16.93in
Machining Length
--
# Axis
6.0in
Chuck Size

Stock #: 185

Used - Good

12.2in
Swing
21.85in
Machining Length
--
# Axis
6.0in
Chuck Size

Stock #: 184

Used - Good

18,000 RPM Capable CAT 40 Spindle Extended ATC Carriage Chip Conveyor and Transformer included!

28.7in
X
22.0in
Y
22.0in
Z
5.0
# Axis

Stock #: 182

Used - Good

Beam ON Time - 3206 Hours *Bellows, Ignitor Bulb and 30 resistors just replaced

60.0in
Sheet-W
120.0in
Sheet-L
2500.0w
Wattage
40.0mpm
IPM

Stock #: 177

18.11in
Swing
19.68in
Machining Length
2.0
# Axis
8.0in
Chuck Size

Stock #: 176

Used - Excellent

5.0
# Axis
9.0in
Swing
38.5in
Machining Length
--
Chuck Size

Stock #: 175

HERMLE 5-AXIS CNC VERTICAL MACHINING CENTER / Model C20U HSK 63 Spindle / 18000 RPM Capable Probe, chip conveyor, and Tool Holders Included!

600.0mm
X
450.0mm
Y
450.0mm
Z
5.0
# Axis

Stock #: 173

Used - Good

The SwissTurn Y-axis slides dualspindle Swiss type CNC auto lathe - the ultimate for bar machining. The main performance benefits offered: * Reduction of cycle times * Great rigidity to allow ma...

20.0mm
Spindle Hole Dia
5.0hp
Power
8000.0rpm
RPM
7.0
# Axis

Stock #: 160

Used - Excellent

Multi Axis Lathe with main and sub spindle. Inculdes tool holders, chucks, and barfeed.

--
# Axis
--
Swing
--
Machining Length
--
Chuck Size

Stock #: 153

Used - Excellent

27.95in
Swing
22.44in
Machining Length
--
# Axis
8.0in
Chuck Size

Stock #: 151

Used - Excellent

Haas VF-2 with 5th axis (4+1). This machine has had very little use and is in excellent condition[ 4 hrs. Run Time /1062 Power ON Time]. The Trunnion table is a TRT-160

30.0in
X
16.0in
Y
20.0in
Z
30.0hp
Power

Stock #: 146

New - In-Stock

DESCRIPTION: 5" X 5" Angle Roll with Steel Machine Body (ST-52) Construction, on Pro 120 Rolls are Driven by a Hydraulic Motor + Planetary Gearbox and Gears, Shafts Made of Special Steel, Hardened...

Stock #: 145

Used - Fair

As Is/Where Is

3.0in
Capacity
24.0in
Grinding Wheel Dia.
15.0hp
GW Power
--
GW RPM

Stock #: 141

Used - Good

The CBT1640 sports and impressive 2 3/8" spindle bore, and a 6 position auto indexing tool post for easy tool changes. The CBT1640 is a very rigid and reliable CNC lathe, and we've had nothing bu...

--
Swing
--
Machining Length
--
# Axis
--
Chuck Size

Stock #: 140

Used - Good

The RH30 is a massive rigid way frame with a 70 mm spindle. With 60″ x 30″ x 28″ travels and weighing 11,000 pounds, this machine is an excellent fit for those needing a larger travel tool room mac...

60.0in
X
30.0in
Y
28.0in
Z
24.0hp
Power

Stock #: 139

Used - Good

--
Swing
--
Machining Length
--
# Axis
--
Chuck Size

Stock #: 138

Used - Good

--
Swing
--
Machining Length
--
# Axis
--
Chuck Size

Stock #: 137

Used - Excellent

The Quantum Macc TA 400-A Fully-Automatic Saw specializes in cutting solid or section bars made of aluminum or light alloys, and runs at 3,000 R.P.M. The blade holder shaft is on bearings with Tefl...

--
Blade Dia
--
Power

Stock #: 135

Used - Good

The PNF350-2CNC is an automatic programmable, pivot arm cold saw that is used to cut non-ferrous metals. The PNF350-2CNC miters from 45° left to 45° right. It also features a robust sawing head tha...

14.0in
Blade Dia
2.5hp
Power

Stock #: 128

New - In-Stock

The Edge Technologies’ Patriot 551 automatic bar feeder is designed specifically for the U.S. marketplace. This bar feeder is designed for automatically feeding round, square, and hexagonal bar sto...

51.0mm
Capacity
12.0ft
Bar Length

Stock #: 126

Used - Good

50.0in
X
26.0in
Y
24.0in
Z
24.0hp
Power
Showing 1 to 30 of 55 records