Daewoo Puma 300GL

Machine Inspection – Daewoo Puma 300 GL

  • Overview
  • Control
  • Gantry System video of operation
  • Specs
  • Pictures
  • Contact

 The Daewoo Puma 300 GL is a powerful 2 axis 35 HP lathe with a 4 inch through hole. It comes with a full gantry system (more details below), chip conveyor, tooling package,  and a 12″ quick change chuck. Is is a single turret build with a 10 position turret. The Gantry Loading System is setup with an overhead loading gantry arm, carousel type parts pool table, and  shaft gripper attachment for loading and unloading long parts. The included chuck is a 12″ Pratt and Burnerd Quick Change Chuck run by a 35 HP spindle at 2800 RPM. This lathe includes 1 OD holder, 6 ID holders,  1 1-1/2″ ID holder, and 6 Face and Turn Holders. 

The Control – The Daewoo Puma 300 GL in our inventory is equipped with a Fanuc 18iT Fanuc 18i supoortcontrol (memory slot input). This high performance CNC control w/ windows and embedded window comes setup with Manual Guide i. It also allows you remote diagnoses via the ethernet port. The machine is run by a Fanuc support system of Fanuc servos, drives, and motors.

As stated in previous articles, the Fanuc Warranty and support on even older machines is very helpful when buying used machinery. Please see our other blogs for more information.

 

The Gantry Loading System is setup with an overhead loading gantry arm, carousel type parts pool table, and  shaft gripper attachment for loading and unloading long parts. Please see the video below to the operation of it.

Specifications:    

  • # axis: 2 
  • Spindle motor: 35 HP 
  • Swing over bed: 23.2″ 
  • Between centers: 25″ 
  • Turret positions: 10 
  • Spindle speed range: 2800 
  • Spindle hole through: 4″ 
  • Max. turning diameter: 15.7″ 

Includes: 

  • All manuals 
  • Chip Conveyor 
  • Gantry System 
  • 1 PIECE – O.D. HOLDERS 
  • PIECE – 2” I.D. HOLDERS 
  • 1 PIECE – 1-1/2” I.D. HOLDER 
  • 6 PIECE –  FACE AND TURN 
  • 12” PRATT AND BURNERD QUICK CHANGE CHUCK. 

 

Pictures

 

 

For more information on buying or selling used machinery, please contact us  or request a quote.

Email: CNCteam@machinemaxx.com or call us at 352-888-6200